View EzEdge Ramp specifications (CAD illustration) View Written EzEdge Ramp specifications (.pdf file) View EzEdge Ramp Installation Instructions

Product application may apply to:

HUD Fair Housing Accessibility Guidelines and the Supplemental Notice

ANSI A117.1 (1986), used with the Fair Housing Act, HUD's regulations, and the Guidelines

CABO/ANSI A1171.1 (1992), used with the Fair Housing Act, HUD's regulations, and the Guidelines

ICC/ANSI A1171.1 (1998) used with the Fair Housing Act, HUD's regulations, and the Guidelines<

The Fair Housing Act Manual (1998)

Code requirements for Housing Accessibility 2000 (ICC/CRHA)

International Building Code 2000 with 2001 Supplement

The EZ Edge™ Threshold Ramp offers a unique solution for removing threshold barriers.

EZ Edge™ Modular Transition Ramps are compression molded from 100% reclaimed rubber with urethane binders. EZ Edge ™ Transition Ramps are quick and easy to install, no special skills or tools required.

Designed and tested to exceed Static of Coefficient Friction requirements by OSHA and surface properties as recommended by the ADA, EZ Edge™ is your best choice for transition modification.

While providing friendly and affordable access, the EZ Edge™ also satisfies an increasing demand for use of recycled materials by architects and contractors, particularly when design and construction are on behalf of public entities requiring such products. EZEdge™ Ramps are compression molded from 100% reclaimed 20 mesh minus crumb rubber with urethane binders, having a maximum hardness (shore A) of 65.

The superior anti-slip qualities of recycled rubber, the rounded 1/4" leading edge, and the 22° side slopes assure a gentle approach for the user. The EZ Edge™ incorporates molded traction pads for both additional anti-slip protection and visual appeal.

The standard EZ Edge™ modifies an existing threshold up to 2-1/4". It can be vertically cut for a lesser height, maintaining its 1:12 slope at any height, and trimmed or notched to fit any threshold configuration. Easily and permanently installed with our commercial grade adhesive, the EZ Edge™ bonds with concrete, asphalt, wood, tile or marble, offering years of durable maintenance free use.

The EZ Edge™ is the sensible, affordable choice for removing threshold barriers.

• Offer an immediate solution for vertical barrier removal
• Install on any surface. Simply notch or trim to fit door jambs & stops.
• Made from 100% Recycled Rubber
• Meets Specific ADA Requirements
• Durable Solid Construction
• Bonds Permanently with Adhesive
• Inexpensive Alternative to Cement & Aluminum
• Superior slip resistance and perfect for exterior use.
• EZedge Transitions will save you time and money

Reference Standards

All ramps shall be installed in accordance with all governing agencies with jurisdiction and in accordance with Americans with Disabilities Act (ADA). EZ Edge Ramp Transition shall be in compliance with relevant sections of the Ameicans with Disabilties Act (1990) and Accessibility Guidelines (ADAAG) Sections 4.2.5 (Changes in Level) and 4.8.2 (Slope & Rise) of the Federal Register, 28 CFR, Part 36 and ANSI Standard A117.1 (1992).

Materials

EZ Edge Ramp Transition material shall be made from 100% reclaimed 20 mesh minus crumb rubber with urethane binders by compression molding, and have a maximum hardness (Shore A) of 65. Ramp shall have a 3/16" (6.35 mm) front radius maintaining a 1:12 slope to the top of ramp. Ramp shall have a maximum 22 degrees beveled side slopes with 3/16" radius front corner.